Analytical-industries GPR-1600 MS Series PPB Oxygen Analyzer User Manual download pdf (Page 23)

Advanced Instruments Inc.

START-UP TEST

ELECTRONICS – PASS

TEMP SENSOR – PASS

BAROMETRIC SENSOR – PASS

REV. 1.61

Note: The analyzer display defaults to the sampling mode when 30 seconds elapses without user interface.

Note: At installation expect the range to default to 25% range, thereafter, 100 ppm range but only if properly isolated.

3.3PPM

AUTO SAMPLING

10 PPM RANGE

24.5 C

LO1 2 PPM 10 PPM HI2

Menu Navigation

The four (4) pushbuttons located on the front of the analyzer operate the micro-processor:

1. blue ENTER (select)

2. yellow UP ARROW

3. yellow DOWN ARROW

4. green MENU (escape)

Main Menu

Access the MAIN MENU by pressing the MENU key:

MAIN MENU

AUTO SAMPLE

MANUAL SAMPLE

CALIBRATION

CONFIG ALARMS

BYPASS ALARMS

Range Selection

The GPR-1600MS analyzer is equipped with four (4) standard measuring ranges (see specification) and provides users with a

choice of sampling modes. By accessing the MAIN MENU, users may select either the AUTO SAMPLING (ranging) or MANUAL

SAMPLING (to lock on a single range) mode.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 49 50

No comments

Analytical-industries GPR-1600 MS Series PPB Oxygen Analyzer User Manual Page 23